Packard-bell C3 Manual de usuario

Packard Bell EasyNote C3 Disassembly Manual Packard Bell EasyNote C3 Disassembly Manual 1

Packard Bell EasyNote C3 Disassembly Manual 10 Removing the LCD Module To remove the LCD Module first remove the battery (see Removing the Battery)

Packard Bell EasyNote C3 Disassembly Manual 11 4. Open up the LCD lid, release the screws and the LCD cable connector. Fig. 14 Removing

Packard Bell EasyNote C3 Disassembly Manual 12Removing the LCD Panel To remove the LCD panel, first remove the LCD module (see Removing the LCD Modu

Packard Bell EasyNote C3 Disassembly Manual 13 Fig. 17 Removing the LCD Panel hinges Removing the CPU To remove the CPU fir

Packard Bell EasyNote C3 Disassembly Manual 14 3. Unscrew the screws on the CPU Heat Sink as shown in Fig. 20, and take out the CPU heat sink.

Packard Bell EasyNote C3 Disassembly Manual 15 Note: Use extra care when unlocking or locking the CPU because the screw driver might cause damage on

Packard Bell EasyNote C3 Disassembly Manual 16 2. Release all screws on the top cover as shown in Fig. 23 Fig

Packard Bell EasyNote C3 Disassembly Manual 17Removing the Touch Pad To remove the touch pad, first remove the top cover (see Removing the Top Cover

Packard Bell EasyNote C3 Disassembly Manual 18 2. Unscrew all screws on the HDD holder as shown in Fig. 27 and separate it carefully from the Main

Packard Bell EasyNote C3 Disassembly Manual 19 4. Lift up the Main Board as shown in Fig. 29 and put it aside. Fig. 2

Packard Bell EasyNote C3 Disassembly Manual 2Table of contents Overview...

Packard Bell EasyNote C3 Disassembly Manual 20 Removing the Speaker Assembly To remove the Speaker Assembly, first remove the Main Board (see Remo

Packard Bell EasyNote C3 Disassembly Manual 21 Fig. 33 Dip Switches settings Screws

Packard Bell EasyNote C3 Disassembly Manual 22Notice The information in this guide is subject to change without notice. This guide contains inform

Packard Bell EasyNote C3 Disassembly Manual 3Overview This document contains step-by-step disassembly instructions for the EasyNote C3 chassis. The

Packard Bell EasyNote C3 Disassembly Manual 4Hazardous Voltage There is hazardous voltage present inside the computer when it is connected to an AC

Packard Bell EasyNote C3 Disassembly Manual 5Removing the Battery Perform the following steps to remove the battery: 1. Make sure to power off the

Packard Bell EasyNote C3 Disassembly Manual 6 2. Unclip the memory module as shown in Fig. 3 Fig. 3 Removing

Packard Bell EasyNote C3 Disassembly Manual 7 Fig. 5 Screws retaining the HDD assembly Removing the Keyboard To

Packard Bell EasyNote C3 Disassembly Manual 8 3. Lift up the keyboard and disconnect it from the system as shown in Fig. 8

Packard Bell EasyNote C3 Disassembly Manual 9 Removing the Optical Disk Drive To remove the ODD, first remove the battery (see Removing the Battery