Packard Bell GX Manual de usuario descargar pdf (Pagina 5)

Packard Bell iPower GX Disassembly Manual

Battery

Perform the following steps to remove the battery:

1. Make sure the power to the system is off.

2. Unplug the AC adapter and all power and signal cables from the system.

3. Turn the notebook upside down.

Note:

Use an anti-static mat or something soft like a piece of cloth underneath the notebook to prevent damage to

the exterior of the notebook.

4. Slide the battery lock/unlock latch into the unlock position.

Fig. 1 Releasing the battery.

5. Slide the battery release latch into the release position and slide the battery out of the unit.

Fig. 2 Removing the battery.

Memory

To remove the memory installed, first remove the battery (see Battery on page 4) and then perform

the following steps:

1. Loosen the screws securing the CPU bay cover (the screws cannot be removed).

Fig. 3 Location of the CPU bay cover screws.

1 2 3 4 5 6 7 8 9 10 ... 33 34

Sin comentarios

Packard Bell GX Manual de usuario Pagina 5